Quantcast
Channel: ProZ.com Translation Forums
Viewing all 8075 articles
Browse latest View live
↧

Sequence contains more than one matching element" - some one help please! | It works!

June 14, 2019, 7:07 am
$
0
0
Forum: MemoQ support
Topic: Sequence contains more than one matching element" - some one help please!
Poster: Sławomir Paluch
Post title: It works!

I followed your instructions and everything worked great!
removed the Memoq and installed it again and everything worked.

I tried everything that came into my head ( starting a new project, repairing the TM, new TM, making QA, making correction, etc) but nothing worked!! :/
Only after reinstalling Memoq things got back to normal!

And also I found NO info on the internet about simillar problem!
So for everyone in the future with the same problem - REINSTALL MEMOQ!

THANKS JOHN! YOU SAVE MY DAY!

and I write back so late because I was soooo late with my work!

Best wishes!
Sławomir

↧
Search

Pre-translation does not overwrite existing unconfirmed segments MemoQ 8.6

June 17, 2019, 7:17 am
$
0
0
Forum: MemoQ support
Topic: Pre-translation does not overwrite existing unconfirmed segments MemoQ 8.6
Poster: Laura Bergamini

I have a large project that has been split between two translators. The client has pre-translated it applying MT to empty segments.
Now we are mid-project and my colleague and I have shared a TMX export of our work so far, so that we can apply each other's work to our portion of the project and reuse matches (100% and fuzzy). She works in Trados, and it went fine for her. I work in MemoQ and it doesn't.
I imported her TMX in my main memory, but during pre-translation new high fuzzy matches do not overwrite the target, unconfirmed MT segments.
Is there any option anywhere to indicate to MemoQ that it should overwrite the existing if a better match is found? I cannot clear the target segments because I would lose all other MT applied by my client, which I am supposed to post-edit.

Thank you!
Laura
↧
↧

Pre-translation does not overwrite existing unconfirmed segments MemoQ 8.6 | Clear translations

June 17, 2019, 7:27 am
$
0
0
Forum: MemoQ support
Topic: Pre-translation does not overwrite existing unconfirmed segments MemoQ 8.6
Poster: Thomas T. Frost
Post title: Clear translations

Have you tried Clear translations in the Preparation tab?
↧

Pre-translation does not overwrite existing unconfirmed segments MemoQ 8.6

June 17, 2019, 7:31 am
$
0
0
Forum: MemoQ support
Topic: Pre-translation does not overwrite existing unconfirmed segments MemoQ 8.6
Poster: Laura Bergamini

I cannot clear translations, otherwise I would lose the MT segments where I have a below 76% match - all segments contain some sort of translation, many are at 0% unconfirmed with MT content. I need to overwrite these where appropriate. Thanks
↧

Pre-translation does not overwrite existing unconfirmed segments MemoQ 8.6 | Save the MT segments in a temporary TM

June 17, 2019, 7:47 am
$
0
0
Forum: MemoQ support
Topic: Pre-translation does not overwrite existing unconfirmed segments MemoQ 8.6
Poster: Thomas T. Frost
Post title: Save the MT segments in a temporary TM

Oh, you didn't say you actually wanted to use the MT. I always delete any MT contents from the start, as it takes me as long time to fix all the MT errors as it does to translate the text properly from scratch.

Anyway, you could create a temporary TM, filter the view so you only see the unconfirmed MT segments, and then confirm and update the MT segments to that. You may need to set the TM status to Working TM. Then the MT is saved. Then, while you are still in the filtered view, clear the translations.

Then you can pre-translate.

↧
↧

Pre-translation does not overwrite existing unconfirmed segments MemoQ 8.6

June 17, 2019, 8:03 am
$
0
0
Forum: MemoQ support
Topic: Pre-translation does not overwrite existing unconfirmed segments MemoQ 8.6
Poster: Laura Bergamini

[quote]
Anyway, you could create a temporary TM, filter the view so you only see the unconfirmed MT segments, and then confirm and update the MT segments to that. You may need to set the TM status to Working TM. Then the MT is saved. Then, while you are still in the filtered view, clear the translations.
[/quote]

If I filter just on 0% matches (MT) and I start editing those, I will run into my high fuzzy matches, which at that point I can apply manually one by one. I'm trying to avoid a manual insertion of individual segments overwriting existing MT. I have about 40,000 words of these...

I found an explanation of the Overwrite behavior in MemoQ 2015 help:
[url removed]

Overwrite behavior
If some target segments already have text, pre-translation overwrites them in some cases, and leaves them as they are in other cases:
•Empty (Not started) segments are always filled in if there is a match.
•Previously pre-translated segments are overwritten if memoQ has a better match than the one that was used earlier.
•Edited or confirmed segments are not overwritten. If you need to overwrite these segments, you need to clear them first using the Clear translations button on the Preparation ribbon tab. Then set their status to Empty/Not started and run the pre-translation.

Bullet 2 is what I am looking for. BUT this is not available (or I can't find it, or it doesn't work) in MemoQ 8.6.
What do they mean by "pre-translation overwrites them in some cases"

I may resort to exporting my project to Trados, do it there and import it back.

Thank you,
Laura
↧

Pre-translation does not overwrite existing unconfirmed segments MemoQ 8.6 | So run a second pre-translate based on the temporary MT TM

June 17, 2019, 8:13 am
$
0
0
Forum: MemoQ support
Topic: Pre-translation does not overwrite existing unconfirmed segments MemoQ 8.6
Poster: Thomas T. Frost
Post title: So run a second pre-translate based on the temporary MT TM

[quote]Laura Bergamini wrote:
If I filter just on 0% matches (MT) and I start editing those, I will run into my high fuzzy matches,
[/quote]

I'm not sure what 'run into my high fuzzy matches' is intended to mean.

I found an explanation of the Overwrite behavior in MemoQ 2015 help:
[url removed]

[quote]Laura Bergamini wrote:
What do they mean by "pre-translation overwrites them in some cases"
[/quote]

I think they mean exactly what you quoted. They explain when existing contents are overwritten.

Once you have saved the MT in a temporary TM, cleared the unconfirmed segments with MT and pre-translated based on the new TM you have received, you can pre-translate again, but this time based on your saved MT. You may need to detach and attach the respective TMs. This would not require you to manually select any segments.
↧

Pre-translation does not overwrite existing unconfirmed segments MemoQ 8.6 | in some cases

June 17, 2019, 2:32 pm
$
0
0
Forum: MemoQ support
Topic: Pre-translation does not overwrite existing unconfirmed segments MemoQ 8.6
Poster: MollyRose
Post title: in some cases

"What do they mean by "pre-translation overwrites them in some cases""

The "some cases" are explained in the 3 bullets below this statement.
↧
Search

Pre-translation does not overwrite existing unconfirmed segments MemoQ 8.6

June 17, 2019, 8:37 am
$
0
0
Forum: MemoQ support
Topic: Pre-translation does not overwrite existing unconfirmed segments MemoQ 8.6
Poster: Laura Bergamini

During MT content editing, I get suggestions with up to 98% matches from my newly imported TMX from my colleague. These have not been applied during pre-translation, and I have to apply them manually (Ctrl+1) before editing the smaller differences and move on.

I need an option where all not confirmed existing content could be overwritten *if* a better match exists in the TM - so that I don't need to insert manually each segment better than a MT. I estimate about 13,000 hits that are not overwritten, that means 13,000 times of pressing Ctrl+1.

MT segments are marked (in pink) 0% Translation Not Confirmed - but they are not overwritten with a better match coming from the TM.

If this can't be achieved, is there a way to mark all 0% segments as EMPTY rather than Translation Not Confirmed?

Many thanks for your help!
Laura
↧
↧

Pre-translation does not overwrite existing unconfirmed segments MemoQ 8.6

June 17, 2019, 5:13 pm
$
0
0
Forum: MemoQ support
Topic: Pre-translation does not overwrite existing unconfirmed segments MemoQ 8.6
Poster: Laura Bergamini

[quote]MollyRose wrote:

"What do they mean by "pre-translation overwrites them in some cases""

The "some cases" are explained in the 3 bullets below this statement.
[/quote]

yes, but bullet 2 does not behave as stated. Pre-translate does NOT overwrite what is in segments (at 0%) even if a better match is found (I have some 98% that are not inserted). Is this a common behavior or a fluke in my installation?

I'm at a loss
↧

Pre-translation does not overwrite existing unconfirmed segments MemoQ 8.6 | ...

June 18, 2019, 12:43 am
$
0
0
Forum: MemoQ support
Topic: Pre-translation does not overwrite existing unconfirmed segments MemoQ 8.6
Poster: Jan Truper
Post title: ...

[quote]Laura Bergamini wrote:

[quote]MollyRose wrote:

"What do they mean by "pre-translation overwrites them in some cases""

The "some cases" are explained in the 3 bullets below this statement.
[/quote]

yes, but bullet 2 does not behave as stated. Pre-translate does NOT overwrite what is in segments (at 0%) even if a better match is found (I have some 98% that are not inserted). Is this a common behavior or a fluke in my installation?

I'm at a loss [/quote]

memoQ seems to be regarding the segments that were pre-translated by your client as "edited" and therefore does not overwrite them.

If I were you, I'd either

-clear all translations • pre-translate using my own preferred MT engine and settings (you could also ask the client which engine they used), or

-generate a new TM of only the client's MT-pre-translated segments • apply a high penalty to this TM • clear all translations • pre-translate.
↧

Pre-translation does not overwrite existing unconfirmed segments MemoQ 8.6 | Bullets 2 and 3

June 18, 2019, 3:09 am
$
0
0
Forum: MemoQ support
Topic: Pre-translation does not overwrite existing unconfirmed segments MemoQ 8.6
Poster: Thomas T. Frost
Post title: Bullets 2 and 3

[quote]Laura Bergamini wrote:

yes, but bullet 2 does not behave as stated. Pre-translate does NOT overwrite what is in segments (at 0%) even if a better match is found (I have some 98% that are not inserted). Is this a common behavior or a fluke in my installation?

[/quote]

As you quoted yourself,

[quote]Laura Bergamini wrote:
•Edited or confirmed segments are not overwritten. If you need to overwrite these segments, you need to clear them first using the Clear translations button on the Preparation ribbon tab.
[/quote]
↧

Pre-translation does not overwrite existing unconfirmed segments MemoQ 8.6 | Save your MT results in a temporary TM

June 18, 2019, 3:14 am
$
0
0
Forum: MemoQ support
Topic: Pre-translation does not overwrite existing unconfirmed segments MemoQ 8.6
Poster: Thomas T. Frost
Post title: Save your MT results in a temporary TM

[quote]Laura Bergamini wrote:

During MT content editing, I get suggestions with up to 98% matches from my newly imported TMX from my colleague. These have not been applied during pre-translation, and I have to apply them manually (Ctrl+1) before editing the smaller differences and move on.

I need an option where all not confirmed existing content could be overwritten *if* a better match exists in the TM - so that I don't need to insert manually each segment better than a MT. I estimate about 13,000 hits that are not overwritten, that means 13,000 times of pressing Ctrl+1.

MT segments are marked (in pink) 0% Translation Not Confirmed - but they are not overwritten with a better match coming from the TM.

If this can't be achieved, is there a way to mark all 0% segments as EMPTY rather than Translation Not Confirmed?

Many thanks for your help!
Laura [/quote]

I suggested a solution yesterday, just before this post: save your MT contents in a temporary TM. Then you can use them for pre-translation after you have cleared the MT segments and pre-translated with your higher matches.

You don't want to lose the MT segments. So just save them. And then clear the MT segments. Then you can juggle things as you want without losing anything.

You have not reacted to that suggestion.
↧
↧

Pre-translation does not overwrite existing unconfirmed segments MemoQ 8.6

June 18, 2019, 8:05 am
$
0
0
Forum: MemoQ support
Topic: Pre-translation does not overwrite existing unconfirmed segments MemoQ 8.6
Poster: Laura Bergamini

[quote]Thomas T. Frost wrote:
I suggested a solution yesterday, just before this post: save your MT contents in a temporary TM. Then you can use them for pre-translation after you have cleared the MT segments and pre-translated with your higher matches.

You don't want to lose the MT segments. So just save them. And then clear the MT segments. Then you can juggle things as you want without losing anything.

You have not reacted to that suggestion. [/quote]

yes, I'm going to try this today. it's a bit cumbersome. I'll also export my project and TMs in Trados and do the same there, to see which one yields better results

Thanks for the suggestion!
↧

Pre-translation does not overwrite existing unconfirmed segments MemoQ 8.6

June 18, 2019, 10:48 am
$
0
0
Forum: MemoQ support
Topic: Pre-translation does not overwrite existing unconfirmed segments MemoQ 8.6
Poster: Laura Bergamini

[quote]Thomas T. Frost wrote:

[quote]Laura Bergamini wrote:

yes, but bullet 2 does not behave as stated. Pre-translate does NOT overwrite what is in segments (at 0%) even if a better match is found (I have some 98% that are not inserted). Is this a common behavior or a fluke in my installation?

[/quote]

As you quoted yourself,

[quote]Laura Bergamini wrote:
•Edited or confirmed segments are not overwritten. If you need to overwrite these segments, you need to clear them first using the Clear translations button on the Preparation ribbon tab.
[/quote]
[/quote]

MT segments show up as NOT CONFIRMED with a big red X and at 0%, which means translation not confirmed, and certainly not edited. They should be overwritten by default, they are not locked in any ways or haven't been touched.
This is a flaw in MemoQ in my opinion. I cannot be the only one facing this issue.

My client pays for MT output, so I cannot clear what has been applied and re-run MT myself.

The workaround to create a temporary MT memory is acceptable, and I thank you for the suggestion.
↧
Search

Pre-translation does not overwrite existing unconfirmed segments MemoQ 8.6

June 18, 2019, 12:19 pm
$
0
0
Forum: MemoQ support
Topic: Pre-translation does not overwrite existing unconfirmed segments MemoQ 8.6
Poster: Laura Bergamini

so, as I don't give up easily I have resolved my issue by taking a different approach that doesn't require so many steps.

I tweaked the XLIFF file configuration during import (I created a new project with the same files), so that existing MT segments would not be mapped to a "partially edited" status (Draft), but rather would be left "unspecified". That way, they were completely overwriteable during pre-translation.

It worked, inserting new 100% and fuzzy matches that overwrote MT where appropriate, but leaving all other MT untouched.

It's a bit convoluted as opposed to SDL Trados, where I simply retranslated my files with an updated TM, automatically overwriting anything if a better match was found.
↧

Pre-translation does not overwrite existing unconfirmed segments MemoQ 8.6 | Good

June 18, 2019, 3:10 pm
$
0
0
Forum: MemoQ support
Topic: Pre-translation does not overwrite existing unconfirmed segments MemoQ 8.6
Poster: Thomas T. Frost
Post title: Good

Good you found a solution.

You are right, MT/fragment assembly is a separate status. I was a bit too quick there. They simply don't define the overwrite behaviour for such segments in their pre-translation definition so we don't even know if it's a bug. It's incomplete documentation.

Ideally the dialogue should let the user decide what to overwrite and what not. There are many such cases where they take a one-size-fits-all approach. I would open a support ticket, well knowing that it will probably take years to get anything done. The translator UI does not seem to be one of their priorities. It is lacking in so many ways. And when they finally change something, it is often useless, e.g. the limited Find/Replace dialogue (I finally got it wiped out). It took them six months to fix an urgent bug that randomly inserted and deleted blanks when Compare versions was used.
↧
↧

Terrible performance issue with MemoQ 8.3

June 18, 2019, 12:36 pm
$
0
0
Forum: MemoQ support
Topic: Terrible performance issue with MemoQ 8.3
Poster: AmauryDoare

Hello,
I have memoQ 8.3, my SMA expired over a year ago...
On my desktop, performance is pretty bad, it's actually better on my laptop, for whatever reasons...
Scrolling in the document is slow, even if I just change the width of part of the UI, it's far from instant (like 1-2 seconds to refresh)
This is not an online project, and it is not a big project...

I've seen people talk about similar issues, but no clear solution - I've tried going back to 8, and even 2015, same problem occurs...

I'd be considering going to 9, but I'm not paying for 2 years SMA, if I have still have this delay on everything I do...
Any idea? This doesn't seem to be a rare issue.

For information:
AMD FX-6300
OS and memoQ on SSD,
10 Gb of RAM
↧

memoQ 9.0 rocks | 8.7 on my splash screen

June 21, 2019, 4:48 am
$
0
0
Forum: MemoQ support
Topic: memoQ 9.0 rocks
Poster: Thomas T. Frost
Post title: 8.7 on my splash screen

My version 9 splash screen says 8.7 too, and it is not because I'm starting version 8.7.
↧

memoQ 9.0 rocks | MemoQ 9.0 rocks...well not really

June 21, 2019, 8:37 am
$
0
0
Forum: MemoQ support
Topic: memoQ 9.0 rocks
Poster: Wolfgang Schoene
Post title: MemoQ 9.0 rocks...well not really

So I uninstalled everything MemoQ 8.7.
I reinstalled MemoQ 9.
Splash screen still shows v8.7
If anybody from MQ support reads this, please let me know why this is so.
It's not vital, but it's annoying.
↧
Viewing all 8075 articles
Browse latest View live
Search